FIA Booklet instructions

AUTO PRODUCTS AND FOOTWEAR IMPORTANT USER INFORMATION

The Alpinestars range of Auto clothing and footwear has been designed to offer optimum levels of protection, performance and comfort. Homologated to FIA standard FIA 8856-2018, the products offer protection against heat transmission and flame. It is very important that you read and fully understand this entire instruction booklet before using this product. Complete protection against all the possible hazards which might be encountered in automobile racing can NEVER be guaranteed.

SIZING AND USAGE:

Users must ensure the clothing fits properly with no areas of skin exposed; if the clothing is too tight when

strapped in the cockpit this will impact on the level of protection it is able to provide. Alpinestars recommends wearing homologated upper and lower body underwear

and a balaclava, and that suitably homologated boots and gloves are also worn.

In order to obtain the maximum level of protection, all the clothing requested in Appendix L (Chapter III, Article 2) to the FIA International Sporting Code should be used.

Users are reminded of the particular vulnerability of the neck, wrists and ankles, and these areas must always be covered by at least two layers of protective clothing.

USE OF UNDERWEAR AND BALACLAVA:

The balaclava and upper body underwear must overlap by a minimum of 3cm around the driver’s neck once the helmet is tightened. The only exception is the area at the

front central line where they should overlap by at least 8cm. The upper body and lower body underwear must overlap by a minimum of 7cm around the driver’s waist.

REPAIRS AND MAINTENANCE:

In the event the product (including footwear) becomes holed or damaged, it must be repaired immediately.

All repairs must use the same thread that is used in the manufacture of the garment, and to this end we

recommend the product is returned to Alpinestars. 

ADDITION OF ADVERTISING:

Any embroidery must be sewn onto the outermost layer of the garment using the same thread that is used in the manufacturing process to prevent the combustion of the badge which will impair the protection of the auto suit. The backing materials of any badges and the thread used for affixing them must be flameproof in accordance with ISO 15025 to ensure neither ignite. Do not use heat bonding when affixing badges and print logos. Additionally it is also recommended that any embroidery thread used on the actual badge be flameproof and in conformity with ISO 15025. Please contact the badge manufacturer if there is any doubt. 

WARNING! In accordance to FIA regulations, only Alpinestars can use printing or transfers for adding advertising onto the garment. It is necessary to have a certificate from the manufacturer for any garment which is customized using printing or transfers; users are warned to keep the certificate to hand in case the garment is inspected by race officials. The garment must never be cut or perforated.

IMPORTANT: Any advertising or customization not complying with these conditions will result in the invalidation of the homologation of the garment. The use of garments with invalid homologation during an event may result in penalties for the driver or even disqualification from an event. IN CASE OF DOUBT, CONTACT ALPINESTARS.

ALLERGY ADVICE:

People with skin allergies to synthetic, rubber or plastic material that may be found on the product should immediately stop wearing the garment. Should any irritation of the skin occur, seek medical advice.


Please read the following important WARNING and LIMITATION of use notice carefully before using this product.

Autosports is an inherently dangerous activity and an ultra-hazardous sport, which may result in serious personal injury and death. Each driver must be familiar with the sport of autoracing, recognize the wide range of foreseeable hazards and decide whether to assume the risks inherent in such an activity with the knowledge of the dangers involved and accept any and all risks of injury, and death. Each driver should use all appropriate protective equipment and exercise the utmost care and safety while driving. Nevertheless, each driver MUST understand that no product or safety device can offer complete or unlimited protection from injury, death or property damage in the event of an accident, collision, impact, fall or other driving event. Products and safety devices must be properly fitted and used correctly. DO NOT use products and safety devices which are won out, modified or damaged. Alpinestars makes no guarantees or representations, express or implied, regarding the fitness of its products for any particular purpose. 

Alpinestars makes no guarantees or representations, express or implied, regarding the extent to which its products protect individuals or property from injury, death or damage. ALPINESTARS DISCLAIMS ANY RESPONSIBILITY FOR INJURES OCCURRED WHILE WEARING ANY OF ITS PRODUCTS.


v 1.3 - G5 01730